A ceramic coating is one of the best things you can do for your paint, but it isn't "set it and forget it." A coating makes washing easier and resists dirt, water and chemicals far better than wax, yet it still gets dirty, still collects minerals, and still needs the right care to keep beading and sheeting the way it did on day one.
Most coatings that "stop working" haven't actually failed. They're buried under road film, minerals and fallout. Maintain it properly and a coating will keep looking and performing great for years. Here's how we maintain ceramic coatings at Vital Detail Supplies.
Your maintenance routine at a glance
Good coating care comes down to a simple rhythm: wash safely and often, remove minerals and iron before they build up, and top up the protection when performance starts to fade. If you're still deciding whether a coating is right for you, our ceramic coating vs. sealant vs. wax guide covers the differences.
The regular wash: pH-neutral or SiO2 shampoo
Your everyday wash does most of the work. Wash every week or two, or whenever the car is visibly dirty, so grime never has the chance to bond. You have two good shampoo choices:
- pH-neutral shampoo gives you a pure clean with nothing left behind. ADS Shampoo+ is a pH-neutral soap that's safe on all coatings and doesn't leave any protection or residue, so what you see after the wash is your coating's real performance.
- SiO2 shampoo cleans and adds a little protection as you wash. GYEON Q²M Bathe+ contains SiO2 to add gloss and hydrophobic properties and boost the coating underneath. Glassparency S3 Ceramic Silica Soap is a pH-neutral soap infused with ceramic and silica that leaves a thin, slick layer of protection.
Plenty of owners keep both on the shelf: SiO2 shampoo for most washes, and a pure pH-neutral wash when they want to judge how the coating itself is doing.
The wash itself:
- Work in the shade on cool panels. Clean the wheels and tires first.
- Pre-wash with a foam such as GYEON Q²M Foam to loosen dirt before you touch the paint. Our foam cannon guide explains the setup.
- Rinse, then contact wash with a soft mitt like the GYEON Q²M Smoothie EVO using the two-bucket method.
- Rinse thoroughly and don't let water dry on the paint.
- Dry with a plush towel such as the THOR The GOAT 2200 Drying Towel or the TRC Gauntlet Drying Towel. A dryer like the BLO Air-S Hand Held Dryer pushes water out of mirrors, grilles and gaps so it can't drip and spot later.
Decontamination: minerals and iron
Even with careful washing, two kinds of contamination build up on a coating over time.
Minerals (water spots)
Hard water, sprinklers and rain leave minerals that sit on top of the coating and block its beading. An acidic wash removes them. ADS DETOX Acidic Shampoo is made for exactly this: it deep cleans and restores the water beading of existing coatings, and contains no gloss enhancers, fillers or waxes. Many coating owners use it every few washes or once a month, alternating with their regular shampoo. For stubborn spots DETOX can't clear, ADS REGEN Acidic Cleaner is the stronger, targeted option. Our DETOX vs. REGEN guide walks through how to use them together.
Iron fallout
Brake dust and rail dust embed in the surface and make the paint feel rough. Every few months, or when the paint feels gritty after a wash, use a gentle, pH-neutral iron remover. GYEON Q²M Iron Redefined keeps a neutral pH and is safe on delicate materials, and ADS Iron Fallout Remover is pH-neutral with color-changing technology so you can watch it work. Follow the label, work on cool panels, and never let it dry.
On a coated car, chemical decon is usually all you need. Save clay for when it's truly necessary, since it's more aggressive than a spray. Our iron remover vs. clay guide explains when each makes sense.
Toppers and boosters
A topper adds a fresh, slick layer on top of your coating, restoring gloss and water behavior between full coating applications. Always decontaminate first. A topper sprayed over minerals just seals the minerals in.
- GYEON Q²M WetCoat: a spray-on, rinse-off sealant you apply to the wet car. It can be used on its own or as a top-up for an underlying ceramic coating, on paint, glass, trim and wheels.
- GYEON Q²M Cure Redefined: a silica-based maintenance spray designed specifically for ceramic coatings.
- GYEON Q²M Ceramic Detailer: a quick-detail maintenance spray for coated cars that adds slickness and gloss, and can also be used as a drying aid.
- GYEON Q²M PPF Maintain Redefined: an SiO2 maintenance spray made for paint protection film and vinyl, in matte or gloss, that can be used alone or as a coating topper.
- Rebels of Shine SiO2 Coating Booster: a water-based SiO2 spray to enhance an existing coating or use on its own.
- ADS PHOBIC Spray Coating: a spray-on ceramic coating, useful when your original coating is near the end of its life and you want to rebuild protection.
How often to top up depends on the product and how the car is used, so follow the label. A good signal is when water stops beading and sheeting even after a DETOX wash.
Pro tip: Toppers work best on clean, cool, dry panels (except WetCoat, which goes on wet). Apply a little, spread evenly and buff off with a clean towel.
What to avoid
- Automatic brush car washes. Spinning brushes carry grit from car to car and can mar the coating. Hand wash whenever you can.
- Harsh degreasers and strong all-purpose cleaners on paint. They're great for wheels, tires and engine bays, but they're unnecessary on a coating and can wear it faster. Stick with dedicated coating-safe products.
- Letting water spots sit. Minerals that bake on in the sun can etch through to the paint. Dry the car after washing, sprinklers or rain, and deal with spots promptly.
- Bird droppings, bug splatter and tree sap. A coating buys you time, not immunity. Remove them gently as soon as you can.
- Washing in direct sun or on hot panels. Soap and water dry too fast and leave spots.
- Polishes and compounds. These remove coating. Only polish if you plan to recoat that area.
Ceramic coating maintenance checklist
- Wash every week or two with a pH-neutral or SiO2 shampoo, using a foam pre-wash and two buckets.
- Dry the car fully every time, including mirrors, grilles and gaps.
- Use an acidic mineral wash like DETOX every few washes or monthly.
- Use a gentle iron remover every few months or when the paint feels rough.
- Top up with a coating-friendly spray when beading and sheeting fade, after decon.
- Skip brush car washes and harsh chemicals on the paint.
- Remove water spots, droppings and bugs as soon as you see them.
Not sure which shampoo or topper fits your coating? Stop by our store at 9121 Garvey Ave in Rosemead or call us at (626) 656-6226 and we'll help you put together a maintenance routine that works for your car. Happy detailing!

