Skip to content
Vital Detail Supplies
You're only $149 away from FREE SHIPPING!
You've unlocked FREE SHIPPING!Applied automatically at checkout

Your cart is empty

Continue shopping
0($0.00)
Ships today if you order within -- --

How to Remove Pet Hair from Your Car

If you drive with a dog, you already know the problem. Pet hair weaves itself into carpet and cloth seats so tightly that a vacuum glides right over it. Short, wiry coats are the worst, and the hair always seems to collect in the cargo area, the back seat and every seam and crevice in between.

The trick is to loosen the hair first, then vacuum it up. Here's how we remove pet hair at Vital Detail Supplies.

Why a vacuum alone doesn't work

Pet hair, especially short, stiff hair, works its way into carpet loops and fabric weave like tiny needles. Vacuum suction isn't strong enough to pull it back out at the angle it's stuck. Rubber and silicone tools solve this by gripping the hair with friction and rolling it into clumps that sit on top of the fibers, where the vacuum can grab it easily.

Why a vacuum alone misses pet hair Left: vacuum suction glides over hair woven into carpet fibers. Right: a rubber tool rolls the hair into clumps on top of the fibers, where the vacuum can grab them.WHY LOOSEN HAIR FIRSTVacuum aloneGlides right over itHair stays woven inRubber tool firstClumps sit on top,vacuum grabs them
Loosen embedded hair first so the vacuum can pick it up.

What you'll need

Step 1: Remove the big stuff

  1. Take out the floor mats, dog bed, blankets and any seat cover you use.
  2. Shake the mats out and take blankets and covers outside to shake off as much hair as you can before washing them.
  3. Do a quick first vacuum pass to remove loose hair, dirt and crumbs. This keeps your rubber tools from getting clogged with debris.

Step 2: Loosen the embedded hair

This is the step that makes the difference.

  1. Work small sections, about the size of a seat cushion or half a footwell.
  2. Use short, firm strokes in one direction with the rubber tool or Lilly Brush, pulling toward you. The hair will start to roll up into clumps and ropes.
  3. Change direction and go over the same area again. Hair that's stuck at a different angle will release on the second pass.
  4. Pile the clumps up in one spot so you can vacuum them quickly.

On really stubborn carpet, lightly mist P&S Release Vacuum Aid over the area first. It's made to help lift embedded pet hair and loosen trapped dirt. Follow the label and don't soak the fabric.

Pro tip: test any rubber tool on a hidden area of delicate fabrics and headliners first, and use light pressure there. Headliners are glued in place, and heavy scrubbing can damage them.

Step 3: Vacuum with the right technique

  1. Vacuum up the clumps you've piled up.
  2. Go back over each section with slow, overlapping passes. A Fur Eel on the end of the crevice tool lets you scrub and vacuum at the same time.
  3. Pay special attention to the seams of the seats, the gap between the seat and backrest, seat rails and the edges of the carpet. A stiff detail brush like the ProGrip Interior Brush sweeps hair out of seams so the vacuum can grab it.
  4. If you have compressed air, blow hair out of the tight gaps between the seats and console toward the open floor, then vacuum.

Step 4: Don't forget the cargo area

The trunk or cargo area is usually where most of the hair ends up. Pull up the cargo floor cover if it's removable and clean underneath. Cargo carpet is often a tightly woven felt material that traps short hair, so the rubber tool and several directional passes are especially helpful here.

Step 5: Clean what the hair leaves behind

Where there's pet hair, there's usually dander, drool, muddy paw prints and the occasional accident. Once the hair is gone:

Always test cleaners in a hidden spot first and let the interior dry completely before your pet rides again.

Leather seats and hard surfaces

Hair doesn't embed in leather, vinyl or plastic, so you don't need rubber tools there. Vacuum with a soft brush attachment and wipe with a damp microfiber towel or an interior cleaner. Watch for scratches from claws on door panels and seat backs, and keep nails trimmed to prevent new ones.

Prevention: keep the hair from coming back

  • Use a seat cover or hammock. A washable seat cover or back seat hammock catches most of the hair and protects the seats from claws and mud. Shake it out and wash it regularly.
  • Brush your dog before car rides, especially during shedding season. A quick brushing outside removes a lot of loose hair.
  • Use a crate or a dedicated blanket in the cargo area.
  • Protect the fabric. A fabric coating like Gtechniq I1 Smart Fabric helps cloth seats and carpets resist water-based stains like drool and muddy paw prints.
  • Keep a rubber tool in the car for quick touch-ups. A few minutes every week is much easier than a full extraction every few months.

Pet hair removal checklist

  1. Remove mats, beds, blankets and covers
  2. Quick first vacuum for loose debris
  3. Loosen embedded hair with a rubber tool or brush in several directions
  4. Vacuum slowly, with extra attention to seams and the cargo area
  5. Spot treat with an enzyme cleaner and neutralize odors
  6. Dry completely
  7. Prevent with seat covers, brushing and regular touch-ups

Not sure which pet hair tool is right for your car and your dog's coat? Stop by our store at 9121 Garvey Ave in Rosemead or call us at (626) 656-6226, and we'll help you pick. Happy detailing!

Never stop learning

Get the right products for the job

Shop 1,600+ detailing products online, or stop by our Rosemead store for real advice and free same-day pickup.

Shop all products Visit the store