ADS PRO Quartz Coating
ADS PRO Quartz Coating
$149.99
/
products.product.pickup_availability.unavailable
Armour PRO Quartz Coating represents the next evolution in surface protection—engineered for performance without compromise. Featuring a high-solids formula and our exclusive LayerSync Bonding system, this advanced coating delivers exceptional durability, gloss, and chemical resistance in a user-friendly, single-layer application.
At the heart of Armour PRO lies LayerSync Bonding—a dual-phase reactive system that bonds twice during installation. First, it forms a permanent covalent anchor to the surface. Then, as you level the product, active molecules link together to create a denser, cross-linked structure. The result is a harder, more resilient coating with enhanced longevity and depth.
Armour PRO is built to withstand the elements. It helps resist stains, bug splatter, bird droppings, sap, and chemical etching—while also providing strong UV protection to help prevent fading and oxidation. The result is a hydrophobic surface that repels water and dirt with ease, making routine maintenance quicker, safer, and more effective. Armour PRO with LayerSync Bonding offers cutting-edge protection in an easy-to-apply format that sets a new benchmark for ceramic coatings.
What's Included:
- 30ml Armour PRO Quartz Coating w/ Dropper Top
- (1) Microfiber Coating Application Pad (We recommend purchasing extras)
- (1) Coating Door Jamb Sticker
- "How To" Direction Card
Precautions:
Shake well.
Avoid applying in direct sunlight.
Wear skin protection.
Wear respiratory protection.
Wear eye protection.
Always test in a small area before full application to determine flash time.
Applying in colder conditions will lengthen the time frame before wipe-off (45-60 seconds). Applying in hotter conditions will give you a shorter time frame before you wipe-off (15-20 seconds).
Shelf life of 12 months, use within 30 days of opening.
Prep:
The Prep is the most important step of the process, our coating is great but it can not do the prep work for you!
1. Decontaminate the paint surface using Armour Detail Supply Decon Soap and Iron Remover, followed by removing further embedded contamination with a clay bar or synthetic clay mitt.
2. If swirl marks, or scratches are present, polish the paint to reduce any surface defects and create maximum gloss.
3. Use our Armour Detail Supply Panel Prep to remove any oils/residue left from your polishing step. If you did not polish the surface, repeat this step twice to ensure a clean surface.
You are ready to apply Armour PRO Coating!
Application:
1. After thorough prep, prime the applicator with 3 lines start and each subsequent application will only need a small amount.
2. Apply Armour PRO Coating 1 section at a time. Initially create an "X" pattern on the panel, then box in all edges to allow for even distribution of the coating. Follow through the panel with small overlapping circles (like a wax) making sure to have even, level coverage. Allow the product to “set up” for roughly 30 seconds depending on temperature/humidity. Look for small sweat beads or light haze to form.
3. In a smooth circular motion level coating 90%+ on 1st wipe (short nap or pearl weave). If the product is hard to remove it needs less time before removal. Switch to 2nd towel (plush) for final leveling, wipe in straight lines for final removal. Check for any streaks, or high spots which can appear as cloudy or dark spots. Repeat this process per panel.
4. Halfway through the vehicle or as the applicator starts to cure, flip the applicator over to a fresh side.
5. Use a fresh side of your removal towels every panel.
Allow 1-2 hours if you choose to layer PHOBIC on top of the Armour PRO Coating.
After Care:
Allow the product to sit 4 hours at minimum for initial cure. After 4 hours you can apply our Armour Detail Supply AMPLIFY to protect the coating during its initial cure. After 4 hours the vehicle can be driven and get wet. Do not wash or induce chemicals for 24 hours.