Clean glass is one of those details everybody notices, especially when it's wrong. Streaks and haze show up the moment the sun hits the windshield or headlights shine through at night. The good news: streaky glass is almost always a towel or technique problem, not a product problem. Get those two right and crystal-clear glass takes only a few minutes.
Here's the process we use at Vital Detail Supplies, featuring the new Koch Chemie Allround Window Cleaner (AWC).
Why glass streaks
- Dirty or worn towels. Towels that have been washed with fabric softener, or used on wax, dressings or polish, smear residue across the glass.
- Too much product. Excess cleaner leaves residue behind as it dries.
- Hot glass or direct sun. Cleaner flashes off before you can wipe it away.
- The interior film. Plastics and vinyl inside the car slowly release vapors that leave an oily haze on the inside of the windshield. That's the film you see as glare at night.
- Contamination on the outside. Water spots, bonded grime and old wiper residue won't come off with a glass cleaner alone.
Meet Koch Chemie AWC
Koch Chemie Allround Window Cleaner is a pH-neutral cleaner made for glass, paint and polycarbonate surfaces. Because it's pH-neutral and works on more than just glass, you don't have to worry much about overspray landing on paint, trim or polycarbonate parts like headlight lenses while you work. It's a great one-bottle option for both the inside and outside of the car. As always, follow the directions on the label.
Other favorites we carry include Koch Chemie Glass Cleaner, Labocosmetica NITIDO, Yum Cars Glass and Stoner Invisible Glass.
What you'll need
- Glass cleaner: Koch Chemie AWC
- Two dedicated glass towels. One to clean, one to buff dry. Waffle weave and short-pile glass towels work best, like the Autofiber No Streak Freak, Autofiber Carbon Glass Towel, Autofiber Smooth Glass or TRC Wrinkle Glass Towel.
- For the inside windshield: the Autofiber Reacher Glass Kit or Amphibian Mini Glass Towels make the hard-to-reach corners easy.
Keep glass towels just for glass. Wash them separately, without fabric softener, and don't use them for anything else.
The two-towel method
- Work in the shade on cool glass.
- Spray the towel, not the glass, for interior windows so you don't get overspray on the dash or screens. On exterior glass you can lightly mist the glass directly.
- Clean with the first towel. Fold it into quarters and wipe with firm, even pressure. Use straight overlapping passes rather than circles.
- Buff with the second, dry towel right away, before the cleaner dries. This is the step that removes streaks.
- Use less product. If you see streaks, the fix is usually less cleaner and a cleaner towel, not more spraying.
Pro tip: wipe the outside of the glass horizontally and the inside vertically. If a streak shows up, you'll know right away which side it's on.
Inside glass
- Dust the dash first so you don't drag dust onto clean glass.
- Lightly spray AWC onto your first towel or the Reacher tool pad.
- Clean the windshield in sections: driver side, passenger side, then the bottom corners where the glass meets the dash. That bottom edge is where most of the haze builds up.
- Buff dry with your second towel.
- Do side windows by rolling them down a few inches to clean the top edge that hides in the seal, then roll them up and do the rest.
- Finish with the mirrors, sunroof and rear glass. Be gentle on rear window defroster lines.
On tinted windows, use a soft towel and light pressure, and make sure your cleaner is tint-safe by checking its label.
Outside glass
- Clean the glass after you wash and dry the car, so you're not fighting dirt and water spots.
- Mist AWC onto the glass, clean with your first towel and buff dry with the second.
- Lift the wipers and clean the area under them, then wipe the wiper blades with a damp towel. Dirty blades smear grime right back onto clean glass.
- Don't forget mirror glass and headlight and taillight lenses. AWC is made for polycarbonate surfaces, so it's a good fit for headlight lenses too.
When glass cleaner isn't enough
If the outside glass still looks hazy, spotty or the wipers chatter, the glass needs deeper cleaning:
- Clay the glass to remove bonded contamination. See our guide on how to clay bar your car; the same process works on glass.
- Polish the glass to remove water spots and wiper haze. Hand options include Shine Supply Glass Polish Plus and Soft99 Glaco Glass Compound Roll On. For machine polishing, CarPro CeriGlass with a Lake Country Glass Polishing Pad or CarPro Glasscut Pad handles heavy spotting.
Protect it so it stays clear
A glass sealant or coating makes rain bead and roll off, improves visibility in wet weather and keeps glass cleaner longer. Options include Yum Cars Glass+ for an easy spray-on option, Glassparency Boost and Shine Supply Beadlock Glass Ceramic Coating for longer-lasting protection. Apply to clean, dry glass, following the product's directions.
Streak-free glass checklist
- Shade and cool glass
- Two clean, dedicated glass towels
- Light mist of Koch Chemie AWC
- Clean with one towel, buff dry with the other
- Horizontal outside, vertical inside
- Clean the wiper blades
- Clay, polish and seal the outside glass when needed
Koch Chemie Allround Window Cleaner is in stock now. Stop by our store at 9121 Garvey Ave in Rosemead or call us at (626) 656-6226 if you need help putting together a glass kit. Happy detailing!

